2014–2018 Ram 2500

Community-sourced DIY repair guides for the 2014–2018 Ram 2500, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Drag-link jam nut separation recall (V06 / NHTSA 19V-021) Owner-verified (6.7L Cummins I6 diesel, 6.4L HEMI V8)

Inspection is a driveway check: crawl under the front end and look at the drag-link adjuster sleeve and jam nut for looseness or rust. The recall work itself is free at any dealer — this note is about knowing what the fix should be.

Typical difficulty: Moderate — based on 60 code guides for the steering repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: OEMDTC — Safety Recall V06 / NHTSA 19V-021: steering linkage may separate, 2014-2018 Ram 2500 4x4 · NHTSA — Part 573 recall report 19V-021 (population, VIN ranges, 4x2 not affected)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 258 complaints for the 2014–2018 Ram 2500. 2016 was the worst year (258 complaints). Most-reported areas: power train, engine, steering.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all 2500 years →

Recalls

14 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2014–2018 Ram 2500 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.