2004–2008 Nissan Maxima

Community-sourced DIY repair guides for the 2004–2008 Nissan Maxima, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Buzzing/whining from timing chain area (NTB07-042) Factory-documented (3.5L V6 (VQ35DE))

Advanced DIY (front of engine apart, ~6 hours book time). Confirm the noise rises with RPM and disappears with the accessory belt removed before committing.

Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).

Typical time: “Advanced DIY (front of engine apart, ~6 hours book time).” — as written in the note. First-timers often take twice this.

Tips

Sources: maxima.org - NTB07-042 bulletin text (VQ engine buzzing/whining from timing chain area; 2004-2008 Maxima A34 applied) · Workshop-manuals.com - NTB07-042D (replace both secondary chains + tensioner shoes, change oil/filter; noise must rise with RPM) · NICOclub - VQ35 rattle/whine thread (rattle = main guide/tensioner; whine = secondary chains + shoes; same RWD 4.0L family issue) · YouTube - Nissan 3.5L V6 timing chain replacement on Altima/Maxima/Quest (3-part DIY walkthrough)

No owner reports yet — fixed this yourself? tell us how

Front floor pan corrosion - PC926 campaign EXPIRED November 2023 Factory-documented (3.5L V6 (VQ35DE))

Inspection is DIY (pull back carpet, look at the driver and passenger floor pans). Repair is a body-shop job - welded/riveted repair plates with structural adhesive per the Nissan procedure.

Tips

Sources: OEMDTC/NHTSA - PC926 expiration notice (voluntary service campaign on 2004-2008 Maxima floor pan corrosion expired Nov 1, 2023; no longer available) · CarComplaints - NTB22-095A for 2004 Maxima (voluntary service campaign: 2002-2006 Altima and 2004-2008 Maxima floor pan) · NissanForums - Altima/Maxima floor pan rust thread (root cause: unsealed spot welds between inner wheel well and body sheet trap water/salt)

No owner reports yet — fixed this yourself? tell us how

Rear ABS light / false ABS activation - hub corrosion (knuckle drain-channel fix) Owner-verified (3.5L V6 (VQ35DE))

Moderate DIY - hub and sensor are accessible; the knuckle drain-channel grinding needs a die grinder or Dremel. Use OE sensors.

Typical difficulty: Moderate — based on 265 code guides for the brake repair area (an area-level estimate, not this exact job).

Tips

Sources: JustAnswer - 2007 Maxima ABS thread (C1105; aftermarket sensors out of spec; Nissan bulletin: grind open the rear-knuckle water drain channel) · JustAnswer - 2007 Maxima ABS problem thread (bulletin drain-channel work; module vs sensor diagnosis; C1124/C1130/C1131 context) · ScannerDanner - 2006 Maxima no left-rear ABS signal thread (TSB on corrosion/false activation; clean the knuckle before reassembly) · TrueDelta - Maxima expensive-problem records (rear hubs packed with rust sludge ruined ABS sensors; drilled larger drain holes per TSB)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 1,505 complaints for the 2004–2008 Nissan Maxima. 2004 was the worst year (1426 complaints). Most-reported areas: power train, tires, suspension.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Maxima years →

Recalls

2 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2004–2008 Nissan Maxima yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.