2016–2017 Mercedes-Benz GLC

Community-sourced DIY repair guides for the 2016–2017 Mercedes-Benz GLC, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Steering gear aluminum bolt corrosion campaign Community-reported (2.0L M274 I4, 2.1L OM651 I4 diesel)

No DIY here — this is a free dealer service campaign. Call a dealer with your VIN and ask them to check for campaign P-SC-2019080019 in their system; it covers MY2016–2017 GLC among other models.

Typical difficulty: Moderate — based on 60 code guides for the steering repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: Mercedes service campaign bulletin

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2016–2017 Mercedes-Benz GLC specifically. See NHTSA data for all GLC years →

Factory service bulletins

We don't have factory bulletin data for the 2016–2017 Mercedes-Benz GLC yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.