Community-sourced DIY repair guides for the 2004–2008 Mazda RX-8, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Dealer performs the recall repair free - owner value is checking VIN/recall status before buying and watching for fuel smell now.
Typical difficulty: Moderate — based on 483 code guides for the fuel repair area (an area-level estimate, not this exact job).
Tips
Two NHTSA fuel recalls hit 2004-2008 RX-8s (~69,447 units each): 16V793000 (Mazda 0516J) - fuel pump sealing rings deteriorate from engine/exhaust heat and can leak fuel; dealers replace the sealing ring set and add a thermal insulation pad to the fuel tank. 17V354000 (Mazda 1017E) - heat can crack the main fuel pump pipe; dealers replace the fuel pump filter kit. Both are free at the dealer.
Any fuel smell on a 2004-2008 car is a park-it-and-check situation - deteriorated seals plus an ignition source is the fire risk both recalls describe. One TrueDelta owner reports a fuel pump replaced for a leak at the fuel-line fitting.
Both recalls began July 31, 2017, so a well-maintained car may already have them done - but many RX-8s changed hands since. Check any candidate car's recall status by VIN on NHTSA's site before buying.
While checking: the same cars carry multiple Takata airbag recalls (driver and passenger inflators, several campaigns 2014-2019). Verify those are complete too.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 531 complaints for the 2004–2008 Mazda RX-8. 2004 was the worst year (514 complaints). Most-reported areas: power train, engine and engine cooling, steering.
19V781000 (31/10/2019) — AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE Mazda North American Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2004-2005 MPV, 2004 RX-8, and 2006-2007 Mazdaspeed6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The…
16V793000 (31/10/2016) — FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP Mazda North America Operations (Mazda) is recalling certain model year 2004-2008 RX-8 vehicles manufactured April 10, 2003, to February 18, 2008. The affected vehicles have fuel pump sealing rings that may deteriorate due to exposure to heat from the engine…
17V474000 (26/07/2017) — AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors…
05V325000 (20/07/2005) — SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT ON CERTAIN PASSENGER VEHICLES, DUE TO IMPROPER FORGING OF THE LOWER CONTROL ARM, CRACKS MAY OCCUR IN THE BALL JOINT SOCKET.
04V075000 (17/02/2004) — POWER TRAIN:MANUAL TRANSMISSION ON CERTAIN PASSENGER VEHICLES WITH MANUAL TRANSMISSIONS, THE HEAT INSULATOR MAY BE CRACKED CAUSING ABNORMAL NOISE.
04V074000 (17/02/2004) — AIR BAGS:FRONTAL AS A RESULT OF AN NCAP TEST, CERTAIN PASSENGER VEHICLES ARE BEING RECALLED FOR IMPROPERLY WIRED FRONT PASSENGER SEAT AIR BAGS.
11 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2004–2008 Mazda RX-8 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.