Community-sourced DIY repair guides for the 1990–1997 Mazda Miata, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Easy DIY: one 12mm bolt, no timing light needed if you scribe the alignment mark.
Typical difficulty: Moderate — based on 5 code guides for the oil repair area (an area-level estimate, not this exact job).
Sources: Miata.Repair NA CAS O-ring replacement guide (location by engine, 12mm bolt, scribe-mark procedure) · Autolink MX5 specialist parts page (CAS O-ring 'probably the most common cause of oil leaks on an MX-5', 1990-1997 fitment)
No owner reports yet — fixed this yourself? tell us how
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
No NHTSA complaint data in our records for the 1990–1997 Mazda Miata specifically. See NHTSA data for all Miata years →
We don't have factory bulletin data for the 1990–1997 Mazda Miata yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.