2010–2015 Lexus RX

Community-sourced DIY repair guides for the 2010–2015 Lexus RX, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

P0A93 'Check Hybrid System' — inverter cooling performance Owner-verified (3.5L V6 hybrid (2GR-FXE))

Diagnosis is DIY-able (fuse, reservoir flow check, Techstream temps). The inverter coolant pump is replaceable by a competent DIYer with HV precautions (service plug out, insulated gloves, 10-minute capacitor discharge), but inverter assembly replacement is hybrid-shop work.

Typical difficulty: Moderate — based on 294 code guides for the cooling repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: ClubLexus: 2010 RX 450h hybrid system issues — P0A93 persisted after dealer pump replacement · RX 450h service manual: P0A93 inspection procedure (coolant quantity, pump active test, replace inverter water pump assembly)

P0A93 on this Lexus RX — full diagnosis guide →

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this RX

P0A93
2010–2015 Lexus RX
P0A93 'Check Hybrid System' — inverter cooling performance

What owners report

No NHTSA complaint data in our records for the 2010–2015 Lexus RX specifically. See NHTSA data for all RX years →

Factory service bulletins

We don't have factory bulletin data for the 2010–2015 Lexus RX yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.