2007–2012 Lexus RX

Community-sourced DIY repair guides for the 2007–2012 Lexus RX, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Engine oil cooler pipe leak — rubber-and-metal section (Lexus LSC) Factory-documented (3.5L V6 (2GR-FE), 3.5L V6 hybrid (2GR-FXE))

Lexus replaced it free under the Limited Service Campaign (expired, but check your VIN in case it was done). DIY is possible with the all-metal pipe kit; TRQ/1AAuto publish a full video for the 2010-2015 RX350.

Typical difficulty: Moderate — based on 5 code guides for the oil repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: Lexus Limited Service Campaign letter (posted on ClubLexus): oil cooler pipe on certain 2007-2012 RX350 and 2010-2011 RX450h · Torque News: Toyota V6 engine oil cooling line warning (2007-2011 RX350, 2010-2011 RX450h) · JustAnswer (Lexus tech): 2007 RX350 oil hose differences — cooler line metal update part 15772-31030

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2007–2012 Lexus RX specifically. See NHTSA data for all RX years →

Factory service bulletins

We don't have factory bulletin data for the 2007–2012 Lexus RX yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.