2007–2009 Lexus RX

Community-sourced DIY repair guides for the 2007–2009 Lexus RX, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

VVT-i oil feed hose — rubber section bursts, sudden total oil loss Owner-verified (3.5L V6 (2GR-FE))

Driveway-able from above. The hose sits on the passenger side of the engine, running to the rear (bank 1) cylinder head. Replace the banjo bolts' copper crush washers — they are single-use.

Typical difficulty: Moderate — based on 5 code guides for the oil repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: ClubLexus: 'Certain 2007 RX350 needs VVT-i Oil hose replacement' — owners debate rubber vs all-metal lines · YouTube: VVT-i oil line replacement on the 2GR-FE (all-metal line 15772-31030, banjo-bolt torque, washer part numbers) · Autoblog: Toyota's Limited Service Campaign on the VVT-i oil line (2007-2009 RX350 in phases 1-2)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2007–2009 Lexus RX specifically. See NHTSA data for all RX years →

Factory service bulletins

We don't have factory bulletin data for the 2007–2009 Lexus RX yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.