Community-sourced DIY repair guides for the 2024–2024 Kia Telluride, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Owner-verified repair guides
Valve-spring recall 24V-077 (2024 engine replacement) Owner-verified(3.8L Lambda II V6)
Dealer-only remedy — engine sub-assembly replacement. The action for owners is recognizing the symptoms early and checking the VIN, since the failure can put a hole in the block.
Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).
NHTSA 24V-077 / Kia SC296 covers 2,872 2024 Tellurides built October 1-December 6, 2023. Supplier-damaged valve springs can fatigue and break, dropping a valve — loss of power, and in rare cases a hole in the engine block.
This is the Kia-side campaign, distinct from the Palisade's Hyundai 24V-106 campaign — different NHTSA number, different brand remedy, different build window. The defect mechanism is the same family, but the coverage lists are separate.
Tell owners what to watch for: abnormal engine noise, rough running, or the check engine light. One documented 2024 case had a pop sound followed by smoke and a confirmed hole in the block — do not keep driving a knocking 2024.
Remedy is free dealer replacement of the engine sub-assembly (not just the springs) — Kia estimates the defect is present in about 3% of the recalled population, but every covered VIN gets the work. Kia customer service: 1-800-333-4542.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
NHTSA recorded 218 complaints for the 2024–2024 Kia Telluride. 2024 was the worst year (218 complaints). Most-reported areas: unknown or other, electrical system, visibility/wiper.
25V494000 (28/07/2025) — STRUCTURE:EXTERIOR TRIM Kia America, Inc. (Kia) is recalling certain 2023-2025 Telluride vehicles. The door belt molding trim can delaminate and detach from the vehicle.
24V214000 (20/03/2024) — POWER TRAIN:DRIVELINE:DRIVESHAFT Kia America, Inc. (Kia) is recalling certain 2020-2024 Telluride vehicles. The intermediate shaft and right front driveshaft may not be fully engaged, which can result in vehicle roll away while in PARK.
24V077000 (07/02/2024) — ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL Kia America, Inc. (Kia) is recalling certain 2024 Telluride vehicles. The engine valve springs may break while driving, which can result in a loss of drive power and possibly create a hole in the engine block.
24V407000 (05/06/2024) — SEATS:FRONT ASSEMBLY:POWER ADJUST Kia America, Inc. (Kia) is recalling certain 2020-2024 Telluride vehicles. The front power seat motor may overheat due to a stuck power seat slide knob, which can result in a fire while parked or driving.
26V430000 (02/07/2026) — SEATS:FRONT ASSEMBLY:POWER ADJUST Kia America, Inc. (Kia) is recalling certain 2020-2024 Telluride vehicles. The front power seat motor may overheat due to a stuck power seat slide knob or an improper recall 24V407 repair, which can result in a fire while parked or…
5 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2024–2024 Kia Telluride yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.