2015–2015 Kenworth W900

Community-sourced DIY repair guides for the 2015–2015 Kenworth W900, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Trailer stop lamp circuit may use undersized wire — lamp failure, FMVSS 108 (14V-722 / PACCAR) Factory-documented (12.9L PACCAR MX-13 diesel (405–510 hp), Cummins ISX15/X15 diesel (400–605 hp))

Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: 1,380 trucks built in a six-week Sep–Oct 2014 window. Undersized wire in the trailer stop lamp circuit can overheat or fail — the trailer's brake lights are the following driver's only warning. The dealer replaces the wire with the correct gauge, free.

Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 14V722 / PACCAR (NHTSA API) · NHTSA Recall 14V722 (oemdtc)

No owner reports yet — fixed this yourself? tell us how

Fuel filter shell may separate — engine stall (14V-486 / PACCAR 14KWJ) Factory-documented (Cummins ISX15/X15 diesel (400–605 hp))

Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: 2,045 trucks — a Cummins-administered campaign (14KWJ/814-H). The fuel filter shell can separate and stall the engine with no warning. Cummins dealers replace the filter with a non-defective one, free; Cummins notifies on PACCAR's behalf.

Typical difficulty: Moderate — based on 483 code guides for the fuel repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 14V486 / PACCAR 14KWJ (NHTSA API) · NHTSA Recall 14V486 (oemdtc)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2015–2015 Kenworth W900 specifically. See NHTSA data for all W900 years →

Factory service bulletins

We don't have factory bulletin data for the 2015–2015 Kenworth W900 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.