2018–2020 Kenworth T680

Community-sourced DIY repair guides for the 2018–2020 Kenworth T680, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Dana steer arm fasteners may fail — loss of steering control (22V-277 / PACCAR 22KWB) Factory-documented (12.9L PACCAR MX-13 diesel (405–510 hp), Cummins X15 diesel (400–605 hp))

Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: 17,641 trucks. Steering-arm fasteners are single-point-of-failure hardware — if they let go, the wheel the driver is steering is no longer connected to the road. Park-it recall.

Typical difficulty: Moderate — based on 60 code guides for the steering repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 22V277 / PACCAR 22KWB (NHTSA API) · NHTSA Recall 22V277 (oemdtc)

No owner reports yet — fixed this yourself? tell us how

Cold temperature may delay parking brake engagement on AMT trucks (19V-275 / PACCAR 19KWB) Factory-documented (12.9L PACCAR MX-13 diesel (405–510 hp), Cummins X15 diesel (400–605 hp))

Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: 1,837 tandem-axle T680/T880s with single-axle parking brakes and automated manuals. In the cold, the park-brake pressure switch signal to the transmission controller can lag — the truck thinks the brake is set before it is. Winter rollaway risk.

Typical difficulty: Moderate — based on 265 code guides for the brake repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 19V275 / PACCAR 19KWB (NHTSA API) · NHTSA Recall 19V275 (oemdtc)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 8 complaints for the 2018–2020 Kenworth T680. 2020 was the worst year (8 complaints). Most-reported areas: power train, service brakes, unknown or other.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all T680 years →

Recalls

8 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2018–2020 Kenworth T680 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.