2018–2018 Kenworth T680

Community-sourced DIY repair guides for the 2018–2018 Kenworth T680, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Cummins fuel pump drive gear may fail — engine stall (17V-443 / Cummins C1909) Factory-documented (Cummins ISX15/X15 diesel (400–605 hp))

Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: 1,737 trucks — a Cummins filing (C1909) administered through PACCAR. A failed fuel-pump drive gear stops fuel delivery dead; the engine quits with it. Fuel-system stall with no warning is a tow, not a roadside fix.

Typical difficulty: Moderate — based on 483 code guides for the fuel repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 17V443 / Cummins C1909 (NHTSA API) · NHTSA Recall 17V443 (oemdtc)

No owner reports yet — fixed this yourself? tell us how

AMT transmission control module may crank the engine out of neutral — unintended movement, FMVSS 102 (17V-840 / PACCAR 17KWF) Factory-documented (12.9L PACCAR MX-13 diesel (405–510 hp), Cummins X15 diesel (400–605 hp))

Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: 1,222 trucks with Eaton Endurant/PACCAR AMTs. The TCM can let the engine crank briefly with the shifter out of neutral — the truck lurches. Parking brake on, every stop, until the software update is done.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 17V840 / PACCAR 17KWF (NHTSA API) · PACCAR to recall Kenworth & Peterbilt trucks over Endurant TCM software (Truck Paper) · NHTSA Recall 17V840 (oemdtc)

No owner reports yet — fixed this yourself? tell us how

Seat belt buckle may be glued shut — buckle will not latch (18V-870 / PACCAR 18KWG) Factory-documented (12.9L PACCAR MX-13 diesel (405–510 hp), Cummins X15 diesel (400–605 hp))

Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: 6,857 T680/T880s. A buckle with adhesive inside the mechanism may not latch at all — the belt looks fine, the buckle is a decoration. Click-test every buckle on a 2018 T680; if it will not latch, this is why.

Typical difficulty: Moderate — based on 119 code guides for the restraints repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 18V870 / PACCAR 18KWG (NHTSA API) · NHTSA Recall 18V870 (oemdtc)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2018–2018 Kenworth T680 specifically. See NHTSA data for all T680 years →

Factory service bulletins

We don't have factory bulletin data for the 2018–2018 Kenworth T680 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.