Community-sourced DIY repair guides for the 2014–2016 Kenworth T680, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Owner-verified repair guides
Alternator charge cable may chafe — short circuit and fire risk (15V-270 / PACCAR 15KWE) Factory-documented(12.9L PACCAR MX-13 diesel (405–510 hp), Cummins ISX15/X15 diesel (400–605 hp))
Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: 1,494 trucks. A chafing charge cable is the classic slow electrical fire: vibration wears insulation, the short finds fuel or plastic, and the truck burns parked or rolling. Inspect the routing on 2014-2016 T680s.
Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).
Torque specs
No owner-serviceable fasteners: verify — Dealer repair only; no owner repair. Free at any Kenworth dealer.
Tips
The alternator charge cable can chafe against nearby components, shorting and risking fire.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 6 complaints for the 2014–2016 Kenworth T680. 2016 was the worst year (6 complaints). Most-reported areas: service brakes, seat belts, electrical system.
21V00N000 (29/12/2021) — ELECTRICAL SYSTEM:WIRING PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system…
20V593000 (28/09/2020) — SERVICE BRAKES, AIR:ANTILOCK PACCAR Incorporated (PACCAR) is recalling certain 2016-2021 Kenworth T680 trucks equipped with a 2.1m Cab and WABCO 6S/6M ABS brake system with drum brakes. The brake systems were manufactured with a standard rear-brake ABS modulator valve instead of a quick…
17V471000 (25/07/2017) — EXTERIOR LIGHTING PACCAR Incorporated (PACCAR) is recalling certain 2013-2017 Peterbilt 567 and 579 Kenworth T680 and T880 trucks equipped with optional spotlights. The spotlight circuit may not be adequately protected in the event of a short.
15V597000 (24/09/2015) — ELECTRICAL SYSTEM:IGNITION:MODULE Paccar Incorporated (Paccar) is recalling certain model year 2016 Kenworth T370, T660, T680, T800, T880, and W900 vehicles manufactured July 31, 2015, to August 12, 2015, and 2016 Peterbilt 337, 348, 365, 367, 382, 386, 389, 567, 579, and 587…
24V145000 (23/02/2024) — SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air…
17V593000 (22/09/2017) — STEERING:LINKAGES:TIE ROD ASSEMBLY PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks…
16 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2014–2016 Kenworth T680 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.