Community-sourced DIY repair guides for the 2021–2023 Kenworth T280, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Owner-verified repair guides
Transmission actuator may slip into an unexpected gear (22V-425 / PACCAR 22KWD) Factory-documented(PACCAR PX-7 6.7L / PX-9 8.9L diesel (220–380 hp))
Dealer-only recall repair — free at any Kenworth dealer. Owner-side value: only 402 trucks — under the usual ~500-unit bar, kept as safety-critical: internal actuator components can slip and miscalibrate, putting the transmission in a gear the driver did not select. Loss-of-control failures get kept at any population.
Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).
Torque specs
No owner-serviceable fasteners: verify — Dealer actuator replacement only; no owner repair. Free at any Kenworth dealer.
Tips
Transmission actuator internals may slip, miscalibrating the actuator — unexpected gear selection.
Kenworth filing 22KWD (Peterbilt 22PBD); dealers replace the transmission actuator free of charge (letters mailed Dec 8, 2022).
Small but safety-critical — documented as the run's explicit tiny-exception.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 1 complaints for the 2021–2023 Kenworth T280. 2023 was the worst year (1 complaints). Most-reported areas: power train.
21V00N000 (29/12/2021) — ELECTRICAL SYSTEM:WIRING PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system…
23V661000 (29/09/2023) — SERVICE BRAKES, AIR PACCAR Incorporated (PACCAR) is recalling certain 2021-2024 Kenworth T280, T380, 2020-2024 Peterbilt 548, 536, 2024 Peterbilt 537, and 2020-2024 Kenworth T480 trucks. The timing of the trailer brake release may be delayed. As such, these vehicles fail to comply with…
23V504000 (21/07/2023) — POWER TRAIN:DRIVELINE PACCAR Incorportated (PACCAR) is recalling certain 2023-2024 Peterbilt 536, 537, 548, 2023-2024 Kenworth T280, T480, and 2024 Kenworth T380 vehicles. The adhesive thread-lock may not have been applied to the four flange mounted yoke bolt threads, allowing the driveline fasteners…
24V190000 (20/03/2024) — POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT PACCAR Incorporated (PACCAR) is recalling certain 2021-2024 Peterbilt 365, 367, 389, 535, 536, 537, 548, 567, 579, and 2021-2025 Kenworth T180, T280, T380, T480, T680, T880 and W990 trucks. The right-hand gear shifter stalk connectors may have been improperly crimped…
22V631000 (17/08/2022) — ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM) PACCAR Incorporated (PACCAR) is recalling certain 2023 Peterbilt 220, 389, 520, 536, 537, 348, 367, 567, 548, 579, and 2023 Kenworth T680, K270, T440, T880, W990, K370, T280, T380, T480, T800, and W900 vehicles. The engine control module (ECM) may…
14 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2021–2023 Kenworth T280 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.