2020–2021 Jaguar I-Pace

Community-sourced DIY repair guides for the 2020–2021 Jaguar I-Pace, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Thermal-overload recall, 2020-2021 packs (26V067 / H570-H572) Factory-documented (all)

Free dealer or OTA interim software update (90% cap). Permanent remedy under development; confirm on the VIN.

Typical difficulty: Involved — based on 854 code guides for the battery repair area (an area-level estimate, not this exact job).

Tips

Sources: recall record (26V067, 2,278 cars, 90% interim cap) · recall timeline (H441/H459/H471 predecessors, 2021-or-earlier packs) · recall detail (LG Poland anode defect, permanent remedy pending)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 60 complaints for the 2020–2021 Jaguar I-Pace. 2020 was the worst year (60 complaints). Most-reported areas: electrical system, unknown or other, engine.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all I-Pace years →

Recalls

8 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2020–2021 Jaguar I-Pace yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.