2019–2020 International RH

Community-sourced DIY repair guides for the 2019–2020 International RH, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

A26 wrist-pin bushing may fail — wave 1 (20V-255 / Navistar 20504) Factory-documented (12.4L International A26 diesel (370–475 hp))

Dealer-only recall repair — free at any International dealer. Owner-side value: this is wave ONE of the A26 wrist-pin saga — trucks repaired under this campaign had to return for waves two (21V-281) and three (22V-691). A 2019-2020 A26 RH needs all applicable waves closed, not just this one.

Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 20V255 / Navistar 20504 (NHTSA API) · NHTSA Recall 20V255 (oemdtc) · Navistar recalling International trucks for engine issue (Land Line Media)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2019–2020 International RH specifically. See NHTSA data for all RH years →

Factory service bulletins

We don't have factory bulletin data for the 2019–2020 International RH yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.