2016–2018 International LT

Community-sourced DIY repair guides for the 2016–2018 International LT, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Air dryer mounting bracket may fracture — brake air pressure loss (17V-174 / Navistar 17502) Factory-documented (12.4L International A26 diesel (370–475 hp), Cummins X15 diesel (400–605 hp))

Dealer-only recall repair — free at any International dealer. Owner-side value: the early-warning signs are on the dash — a dropping air-pressure gauge or the in-cab low-air buzzer means the bracket has already failed.

Typical difficulty: Moderate — based on 265 code guides for the brake repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA recall record 17V174 / Navistar 17502 (NHTSA API) · Navistar Recalls 2,700 Trucks Over Brake Failure Risk (Heavy Duty Trucking)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2016–2018 International LT specifically. See NHTSA data for all LT years →

Factory service bulletins

We don't have factory bulletin data for the 2016–2018 International LT yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.