Community-sourced DIY repair guides for the 2019–2020 International CV515, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Owner-verified repair guides
Brake pressure switch harness missing protective material — remedy-of-remedy recall (25V-763 / International Motors 25521) Factory-documented(6.6L Duramax V8 diesel (350 hp / 700 lb-ft))
Dealer-only recall repair — free at any International dealer. The owner-side value: a used CV515 can still show this campaign open — check the VIN at nhtsa.gov/recalls before buying, and confirm all linked brake campaigns are closed, because later recalls re-repaired trucks already fixed under earlier ones (the same three-act brake saga as the Chevrolet Silverado MD twin).
Typical difficulty: Moderate — based on 265 code guides for the brake repair area (an area-level estimate, not this exact job).
Torque specs
No owner-serviceable fasteners: verify — Dealer-only recall — brake pressure switch assembly replacement and wire-harness/fuse inspection; no owner torque specs apply.
Tips
The International twin of GM's 25V-768, filed November 6, 2025: 159 CV trucks (2019-2020) that had already been remedied under 25V-414 got a replacement brake pressure switch harness assembled WITHOUT protective material on the wires. Unprotected wires can short, reducing brake performance and extending stopping distance.
NHTSA's wording is explicit about the chain: “Vehicles in this recall that were previously repaired under 23V282 and 25V414 will need to have the new remedy completed.” Two prior repairs do not count — this is the third brake-saga visit for these trucks.
Remedy: dealers remove the installed harness, add the protective material, and reinstall it — free. Owner notification letters mailed December 2025. International's number 25521; customer service 1-800-448-7825.
Buying a 2019-2020 CV515? This is the campaign most likely to be missed: owners who did the 2023 and 2025 recalls often assume they're done. The full brake-saga checklist for these years is 23V-282 → 25V-414 → 25V-763, in that order — verify all three at nhtsa.gov/recalls.
ABS malfunction indicator may not light — BCM software noncompliance (20V-285 / Navistar 20505) Factory-documented(6.6L Duramax V8 diesel (350 hp / 700 lb-ft))
Dealer-only recall repair — free BCM software calibration update. The owner-side value: a used 2019-2020 CV515 should show this closed in its history; an ABS lamp that never self-tests at key-on is the tell that it was missed.
Typical difficulty: Moderate — based on 265 code guides for the brake repair area (an area-level estimate, not this exact job).
Torque specs
No owner-serviceable fasteners: verify — Dealer-only recall — brake pressure switch assembly replacement and wire-harness/fuse inspection; no owner torque specs apply.
Tips
2,805 International CV trucks, 2019-2020: a software error means the ABS malfunction indicator does not light when communication is lost between the Electronic Brake Control Module and the Body Control Module — an FMVSS 105 (Hydraulic and Electric Brake Systems) noncompliance. The truck can have an inoperative ABS or traction control system with no dash warning at all.
The International twin of GM's 20V-319 (the Silverado MD campaign) — same defect class, same free BCM software calibration remedy. Recall began July 20, 2020; Navistar's number 20505; customer service 1-800-448-7825.
Completion as of end of 2021 was 2,020 of 2,805 — nearly 800 trucks still open at last count, and there's no part to inspect, so completion lives or dies in the service history. Check the VIN at nhtsa.gov/recalls.
Quick self-check on any used 2019-2020 CV515: at key-on, every warning lamp — including ABS — should self-test and light briefly. If the ABS lamp never lights at key-on, either the lamp path is dead or this recall was never applied. Either way, get it checked.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
We don't have factory bulletin data for the 2019–2020 International CV515 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.