2014–2015 Infiniti Q50

Community-sourced DIY repair guides for the 2014–2015 Infiniti Q50, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

P0720 output speed sensor code: replace the control valve, not the sensor (TSB ITB19-040) Owner-verified (3.7L VQ37VHR V6 (non-hybrid))

Driveway-diagnosable: a P0720 on a 2014-2015 Q50 with harsh shifts or limp mode points at the valve body, not the sensor. The fix is pan-drop valve-body/TCM replacement — a transmission-shop job for most, but knowing the bulletin saves owners from a wasted sensor replacement first.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: Infiniti TSB ITB19-040 (AT19-014, Nov 2019) via NHTSA: 2014-2015 Q50 MIL ON with DTC P0720 - replace the control valve, do NOT replace the output speed sensor (PDF) · tsbsearch.com mirror of Infiniti TSB ITB19-040: 2014-2015 Q50 (V37) P0720, harsh shifting and/or lack of power - control valve replacement per ESM RE7R01A · Mils Garage YouTube: P0720 Nissan/Infiniti 7AT fix - P0720 knocked out on a 2015 Infiniti Q50, how to access the valve body and what needs fixing

P0720 on this Infiniti Q50 — full diagnosis guide →

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this Q50

P0720
2014–2015 Infiniti Q50
P0720 output speed sensor code: replace the control valve, not the sensor (TSB ITB19-040)

What owners report

No NHTSA complaint data in our records for the 2014–2015 Infiniti Q50 specifically. See NHTSA data for all Q50 years →

Factory service bulletins

We don't have factory bulletin data for the 2014–2015 Infiniti Q50 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.