Community-sourced DIY repair guides for the 2021–2022 Hyundai Sonata N Line, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Dealer recall work — the connection sits between the high-pressure fuel pump and the fuel rail. The dealer inspects the pipe connection and either tightens it or fits a new fuel pipe. Nothing in this procedure is owner-DIY.
Typical difficulty: Moderate — based on 483 code guides for the fuel repair area (an area-level estimate, not this exact job).
Torque specs
Fuel pipe connection: verify — Torque specs for the fuel pipe connection not confirmed from a source — recall work is dealer-performed; confirm against factory service info before torquing.
Tips
This one is N Line-specific within the Sonata lineup: the recall covers only 2021-2022 Santa Fe and Sonata models with the 2.5L turbocharged engine. The Sonata N Line is the 2.5T Sonata, so if you own one in these model years, this recall is yours.
The failure is a fuel leak at the pipe connection between the high-pressure fuel pump and the fuel rail. A fuel leak near hot engine parts is a fire risk, so this is not a watch-and-wait item.
The remedy is free at any Hyundai dealer: they inspect the connection and tighten it, or replace the fuel pipe if needed. Owner notification letters went out starting September 3, 2021, but recalls never expire — check your VIN on NHTSA.gov if you bought used.
If you smell fuel under the hood on a 2021-2022 N Line, do not keep driving it to a shop appointment; a leak here is the exact failure this recall covers.
8DCT fail-safe loss of drive power (recall 236) Factory-documented(2.5L Turbo GDI (Smartstream G2.5T))
Dealer recall work — the dealer inspects the 8-speed wet dual-clutch transmission and replaces it if needed, then updates the transmission control unit software. Nothing in this procedure is owner-DIY.
Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).
Torque specs
Transmission replacement fasteners: verify — Torque specs not confirmed from a source — recall work is dealer-performed; confirm against factory service info before torquing.
Tips
Within the Sonata lineup, this recall is effectively N Line-only: the 8-speed wet dual-clutch transmission is exclusive to the N Line; base Sonatas use a conventional automatic. So a 2021-2022 Sonata with the DCT is a Sonata N Line.
The defect: a high-pressure electric oil pump malfunction can corrupt the transmission's fail-safe limited-mobility mode, which can turn into a complete loss of drive power.
The dealer remedy is free: they inspect the transmission and replace it if necessary, plus update the transmission control unit software. Owner notification letters were mailed January 10, 2023.
This recall is the factory's own acknowledgement of the 8DCT's weak point — if you are shopping for a used N Line, confirm this recall is closed on the VIN before buying.
Hyundai's own model-year change for 2026 (replacing the DCT with a conventional 8-speed automatic in the Santa Fe and Santa Cruz) shows the company walked away from this gearbox; the N Line kept its DCT, so keep this recall on your radar.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
We don't have factory bulletin data for the 2021–2022 Hyundai Sonata N Line yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.