2020–2023 Hyundai Palisade

Community-sourced DIY repair guides for the 2020–2023 Hyundai Palisade, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Wiper motor failure in snow — wiper arm recall Owner-verified (3.8L Lambda II V6)

The driver-side wiper arm is visible at the base of the windshield. If your Palisade's wipers stall or quit in snow, check your VIN for the open recall before paying for any wiper repair — the dealer replaces the driver-side arm free.

Torque specs

Tips

Sources: CarComplaints investigation record (RQ22005) · NHTSA recall mirror · NHTSA recall mirror

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 537 complaints for the 2020–2023 Hyundai Palisade. 2020 was the worst year (537 complaints). Most-reported areas: engine, visibility/wiper, unknown or other.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Palisade years →

Recalls

5 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2020–2023 Hyundai Palisade yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.