Community-sourced DIY repair guides for the 2022–2025 Hyundai Ioniq 5, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Owner-verified repair guides
12V battery dies unexpectedly (drain + AGM swap) Owner-verified(EV)
The 12V battery is a standard lead-acid unit under the front hood, not under the car. Swap is a 15-minute DIY with basic hand tools.
Typical difficulty: Involved — based on 854 code guides for the battery repair area (an area-level estimate, not this exact job).
Torque specs
12V battery terminals/clamp: verify — No owner-confirmed torque spec found — confirm against factory service info before torquing.
Tips
Learn the pattern: the car is dead after sitting (sometimes just overnight), a jump gets it going, and it dies again soon after. Repeated deep discharges permanently damage the stock 12V, so one that has been flat multiple times often will not hold a charge even after the underlying cause is fixed.
Hyundai's own root-cause finding (shared with InsideEVs): excessive Bluelink server traffic — some cars saw thousands of wake-up requests per day from unauthorized third-party apps. Hyundai fixed it server-side by limiting Bluelink to 20 transactions per day and blocking the offending apps, and advised owners to change their Bluelink password. If your drain started after adding a third-party app, that was very likely it.
Hyundai named a second cause: 'EV Light On with DTC P1A9096,' ICCU-related — in that case the fix is ICCU and ICCU-fuse replacement at the dealer (see the separate ICCU note), not another battery.
Owner-proven upgrade: replace the failed stock battery with a quality AGM 12V (a Canadian owner picked a Kirkland AGM over the dealer's $498.60 quote). AGM tolerates the Ioniq 5's cycling better. If voltage has dropped under about 10V, the old battery is damaged — replace it, don't keep recharging it.
Prevention habits owners swear by: keep a portable jump booster in the frunk, run Utility Mode for a few minutes weekly to top the 12V, and don't leave third-party apps hammering Bluelink while parked.
Open the tailgate and find the side guide bumpers on the body (not the ones on the hatch) — they are the angled bumpers on the sides of the hatch opening, held by T40 Torx bolts.
Torque specs
Tailgate side guide bumper bolts: verify — Bolts carry thread sealant and have a specific torque — confirm against factory service info before torquing; do not overtighten plastic bumpers.
Tips
Diagnose first: a clunk, rattle, or friction squeak from the rear over bumps and speed bumps that changes when the tailgate is pressed by hand points at the side guide bumpers, not the suspension. Hyundai issued TSB 23-BD-006H-1 for 2022-2025 Ioniq 5 (built 10/04/2021-05/10/2024) for exactly this — the dealer adds washers behind the guide bumpers and bumper kit 81771-GI501QQH.
The owner-proven driveway version: remove one side bumper at a time with a T40 Torx, slide washers (or thin gasket material, about 1mm) behind it, and snug it back — that fixed the rattle completely for multiple ioniqforum owners. Note the bolts have thread sealant and are stiff to start.
After shimming, the angled face of the bumper needs to make firm contact with the hatch when closed. If a shimmed car goes quiet for a few months and then rattles again, the shims have compressed — add another washer or use heat-resistant plastic shims rather than stacking thinner ones.
Do not confuse this with license-plate buzz or interior trim squeaks — several owners chased the wrong noise. Press on the closed tailgate while a helper listens at the side guides to confirm the source.
The TSB repair is warrantable at an Ioniq-certified dealer if you are still covered — several owners had the dealer do the washer TSB and reported the problem solved. The TSB text also mentions a pry-bar-and-hammer step; leave that to the dealer.
Some owners report the fix degrades over time as shims compress or body tolerances shift — one 2024 owner cycled through shims, tape, and adjusted stops with only temporary relief, so treat the washer fix as the first step, not a guaranteed forever fix.
Infotainment freezes, glitches, or dies (reboot sequence) Owner-verified(EV - single/dual motor)
No tools for the basic resets — the pinhole reset is under the screen on some units and the power-hold reboot uses the infotainment power button. A dead head unit is a dealer replacement.
Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).
Torque specs
Infotainment head unit: verify — Basic resets are software-only; a dead unit is a dealer replacement — no DIY torque specs apply.
Tips
First step for a frozen or glitching screen: hold the infotainment power button about 10 seconds to force a reboot — this is the documented owner fix for random freezes and audio/nav dropouts.
If the power-hold reboot does not clear it, use the small pinhole reset on the unit (location varies by unit; one owner on boards.ie used it to fix a dead FM radio with static crackle). Do a full factory reset (Settings - General - System Info - Reset) only as a last resort before the dealer — it erases saved data and paired devices.
Check for software updates after any glitch: a 50,000-mile Ioniq 5 owner found maps completely dead with no way to update, roll back, or reinstall — the dealer tried the 12V disconnect, factory reset, pinhole reset, and software reinstall and still had to replace the whole infotainment unit. If updates will not install, the unit is likely bad, not confused.
Loss of nav/maps also kills battery preconditioning, since preconditioning requires a nav destination — so an infotainment failure has a real charging-speed consequence on cold-weather road trips.
Keep software current either way: Hyundai released nav/head-unit software change bulletins (NHTSA comms) that fix glitch families before they become hardware failures.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 222 complaints for the 2022–2025 Hyundai Ioniq 5. 2024 was the worst year (222 complaints). Most-reported areas: electrical system, fuel/propulsion system, power train.
24V868000 (18/11/2024) — ELECTRICAL SYSTEM:12V/24V/48V BATTERY Hyundai Motor America (Hyundai) is recalling certain 2022-2024 IONIQ 5, 2023-2025 IONIQ 6, Genesis GV60, Genesis GV70 "Electrified," and Genesis G80 "Electrified" vehicles. The Integrated Charging Control Unit (ICCU) may become damaged and stop charging the 12-volt battery, which can…
24V204000 (15/03/2024) — ELECTRICAL SYSTEM:12V/24V/48V BATTERY Hyundai Motor America (Hyundai) is recalling certain 2022-2024 IONIQ 5, 2023-2024 IONIQ 6, Genesis GV60, Genesis GV70 "Electrified," and Genesis G80 "Electrified" vehicles. The Integrated Charging Control Unit (ICCU) may become damaged and stop charging the 12-Volt battery, which can…
26V432000 (02/07/2026) — ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY Hyundai Motor America (Hyundai) is recalling certain 2023-2024 Ioniq 5 vehicles. The high voltage battery cells may contain misaligned electrodes, which can lead to a fire while parked or driving.
3 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2022–2025 Hyundai Ioniq 5 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.