2007–2020 Honda Fit

Community-sourced DIY repair guides for the 2007–2020 Honda Fit, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Trunk / cabin water leak Owner-verified (1.5L L15A I4, 1.5L L15B7 I4)

Peel back the black roof gutter trim on both sides and look for hairline cracks in the seam where the roof panel meets the body — a paint-brush bristle is the classic way to find them. The taillight gaskets dry out with age and are the second-most-common entry point. For the door leak, pop the door card and check whether the plastic vapor-barrier sheet is still sealed to the door frame.

Torque specs

Tips

Sources: owner forum (solved thread) · owner data · owner forum

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 486 complaints for the 2007–2020 Honda Fit. 2008 was the worst year (217 complaints). Most-reported areas: air bags, electrical system, engine.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Fit years →

Recalls

23 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2007–2020 Honda Fit yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.