Community-sourced DIY repair guides for the 2017–2022 GMC 2500, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Diagnosis is DIY (UV dye, careful cleaning and inspection). Repair is advanced DIY at best - upper oil pan reseals on a Duramax are notorious for repeat leaks.
Typical difficulty: Moderate — based on 5 code guides for the oil repair area (an area-level estimate, not this exact job).
Torque specs
No fasteners involved in diagnosis: verify — Leak-path identification procedure; repair torque specs come from GM SI once the leaking joint is identified.
Tips
TSB 18-NA-150 (January 2022, verified NHTSA PDF): GM published an oil-leak PATH identification guide for 2017-2022 Silverado/Sierra 2500/3500 with the L5P (and L5D medium-duty). It walks techs through where to look for leaks on the 6.6L Duramax with illustrations. Coverage for GMC Sierra 2500/3500: 2017-2018 and 2019-2022.
The key diagnostic trap in the bulletin: a leak on TOP of the engine trails down the BACK side of the engine and appears to be a REAR COVER leak. Do not condemn the rear main seal or rear cover from a glance at the bellhousing - clean the engine, add UV dye, drive it, and re-inspect to trace the real path.
Owner reality: upper oil pan reseals are fiddly. A DuramaxDiesels owner documented the upper pan seal still leaking in two places after a reseal and had to tear it apart a second time - RTV sealant, alignment dowels, and bolts hidden inside the lower pan make the reseal unforgiving.
Work the checklist from the top down: oil fill cap and PCV/CCV, turbo oil feed/return, valve covers, oil cooler plate, lower pan, upper pan, then rear cover and rear main seal last. Oil travels with gravity and airflow - the source is almost always above and ahead of the drip.
This is NOT the rear main seal being a known L5P failure - it is a diagnosis guide. Most 'rear main' verdicts on forums turn out to be upper pan, oil cooler plate, or top-of-engine leaks trailing down.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
We don't have factory bulletin data for the 2017–2022 GMC 2500 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.