2016–2017 GMC 2500

Community-sourced DIY repair guides for the 2016–2017 GMC 2500, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Loose steering / excessive play — steering gear lash adjuster (GM PI PIT5501) Factory-documented (6.0L Vortec V8 (L96), 6.6L Duramax V8 (LML/L5P))

Diagnosis is a driveway check; the actual fix is a dealer or steering-shop job — it involves removing the steering gear and resetting the over-center lash per the GM procedure, not a driveway adjustment.

Typical difficulty: Moderate — based on 60 code guides for the steering repair area (an area-level estimate, not this exact job).

Tips

Sources: GM PI PIT5501E — Steering Feels Loose / Excessive Lash / Fluid Leak At Lash Adjuster (2016-2017 Sierra/Silverado 2500/3500) · What is wrong with the steering on some of the 2016 Chevy Silverado 2500HDs? (~400-post owner thread, PIT5501C cited)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2016–2017 GMC 2500 specifically. See NHTSA data for all 2500 years →

Factory service bulletins

We don't have factory bulletin data for the 2016–2017 GMC 2500 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.