2001–2006 GMC 2500

Community-sourced DIY repair guides for the 2001–2006 GMC 2500, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

8.1L Vortec crankshaft position sensor — intermittent stall/no-start and recall 07V-521 Factory-documented (8.1L Vortec V8 (L18))

Easy driveway job — the sensor is one 10mm bolt on the side of the block. The catch is the crankshaft position relearn afterward, which needs a scan tool that can do the GM crank relearn procedure.

Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).

Tips

Sources: GM recall 07V-521 / 06083 — 2001 Silverado/Sierra 8.1L crankshaft position sensor (NHTSA RCMN-07V521-1689) · How to Replace Crankshaft Position Sensor 2001-2006 Silverado 2500HD 8.1L V8 (repair video, relearn note) · 2004 Silverado 2500HD no-start diagnosis — crank sensor vs fuel pump relay test (Q&A)

P0335 on this GMC 2500 — full diagnosis guide →

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this 2500

P0335
2001–2006 GMC 2500
8.1L Vortec crankshaft position sensor — intermittent stall/no-start and recall 07V-521
P0336
2001–2006 GMC 2500
8.1L Vortec crankshaft position sensor — intermittent stall/no-start and recall 07V-521

What owners report

No NHTSA complaint data in our records for the 2001–2006 GMC 2500 specifically. See NHTSA data for all 2500 years →

Factory service bulletins

We don't have factory bulletin data for the 2001–2006 GMC 2500 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.