Community-sourced DIY repair guides for the 2015–2015 GMC Canyon, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Owner-verified repair guides
Sudden power steering loss — recall N202325410 Owner-verified(2015 Canyon (all engines))
Check your VIN for GM recall N202325410 (NHTSA 21V-213) before paying for any steering work — the dealer replaces the steering gear torque sensor cover assembly free. If assist cuts out while driving, you still have manual steering; slow down and grip firmly, especially at parking-lot speeds.
Typical difficulty: Moderate — based on 60 code guides for the steering repair area (an area-level estimate, not this exact job).
The signature is sudden loss of power steering assist at startup or while driving, with a malfunction indicator light and a warning chime — the truck reverts to heavy manual steering. Root cause is a poor electrical connection inside the steering gear assembly: corroded connectors, or connectors damaged by the supplier during manufacturing.
This went through two rounds: an earlier 2016 recall covered only about 3,000 early-2015 trucks, then NHTSA kept receiving complaints (50+ more from 2016–2019, all outside the first recall; over 340 owner complaints to NHTSA and 924 to GM, seven involving crashes) and opened an investigation. GM's April 2021 expanded recall (N202325410) covers just over 60,000 US trucks plus 5,000 in Canada.
Important history: GM ran a customer satisfaction program in June 2018 that replaced the complete power steering rack for complaining owners, but that program expired June 30, 2020. The 2021 recall is the live remedy — dealers replace the steering gear torque sensor cover assembly with an updated part and anti-corrosion gel, free.
Trucks built after May 22, 2015 got gold-plated connectors and anti-corrosion gel from the supplier, so the risk concentrates on early-2015 builds — but check the VIN regardless; coverage is by VIN, not build date.
Do not confuse this with a bad power steering pump or low fluid: this is an electrical connection failure inside the gear, and no fluid service fixes it.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
We don't have factory bulletin data for the 2015–2015 GMC Canyon yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.