Community-sourced DIY repair guides for the 2021–2023 Genesis G80, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Dealer-level: Genesis TSB 23-BD-014G covers 2021–2023 G80 (RG3) vehicles built 7/25/2020–4/6/2023, calling for a panoramic-sunroof noise assembly kit (felt/Teflon-tape hardware) plus mechanism R&R. The DH generation had its own bulletins (18-BD-001HG / 19-BD-001H) with a similar creak-repair procedure.
Torque specs
Sunroof hardware: verify — Torque specs not published in the TSB summary — dealer procedure; not a DIY torque item.
Tips
The symptom owners describe: constant creaking when the chassis flexes — speed bumps, driveways, uneven roads — plus light rattles from the headliner area. One 2021 G80 2.5T Prestige owner got a full warranty repair after citing the forum to the dealer and Genesis corporate.
The documented fix path: the dealer performs TSB 23-BD-014G (noise assembly kit with revised bolts + Teflon tape, plus sunroof mechanism removal/reassembly). For persistent cases, owners have had the entire panoramic sunroof assembly replaced under warranty.
Practical advice from the owner who succeeded: document every visit on the work order — if the dealer can't fix it in three tries, lemon-law buyback pressure in some states moves things along. His repair took 3+ weeks with backordered seals, so insist on a loaner/rental.
Honest caveat: this is a stubborn one — one owner had the full assembly replaced and the creak came back weeks later. The TSB kit is the documented first move; assembly replacement is the escalation.
For 2017–2020 DH G80s, the applicable bulletins are 18-BD-001HG / 19-BD-001H (silicone-oil application to the glass moldings and door weather-strip diagnosis first), and owners of those cars report the same dealer warranty remedies.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
We don't have factory bulletin data for the 2021–2023 Genesis G80 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.