Community-sourced DIY repair guides for the 2019–2022 Genesis G70, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Dealer job under a federal safety recall — no DIY teardown needed. If you smell burning oil or see oil spots under the left side of the engine bay on a 2019–2022 3.3T, stop driving it and have it towed: oil on the exhaust manifold is the fire risk this recall exists for.
Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).
Torque specs
Turbo oil feed pipe (recall work): verify — Dealer-performed recall; no owner torque spec published. Confirm against the recall service procedure if a shop does the work outside the campaign.
Tips
The left-hand turbo oil feed pipe can crack from prolonged heat exposure, dripping oil onto the exhaust manifold. Hyundai documented 81 US reports (June 2020–January 2024) before filing; no confirmed fires, but the risk is why NHTSA lists it as a fire recall.
Covered: certain 2019–2022 G70 3.3T built May 2, 2018–September 1, 2021, plus 3.3T G80 and G90. 28,439 units total. The supplier changed the pipe material in August 2021, so later builds are out of scope.
The remedy is free: dealers replace the pipe/hose assembly with a redesigned stainless-steel version. Owners get a special tool-free procedure — no engine drop required despite early dealer confusion.
This recall (019G) expands and replaces the earlier 19V-538 campaign. If your car was already repaired under 19V-538, you still need the new remedy completed — check your VIN with a dealer or on NHTSA's site.
This is a different campaign from the Santa Fe 2.5T turbo oil-supply pipe recall already in the database — different engine, different pipe, different recall number.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 13 complaints for the 2019–2022 Genesis G70. 2020 was the worst year (13 complaints). Most-reported areas: fuel/propulsion system, electrical system, unknown or other.
24V528000 (12/07/2024) — FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP:CONTROL/DRIVE MODULE Hyundai Motor America (Hyundai) is recalling certain 2019-2022 Veloster N, 2019-2023 Genesis G70, 2022-2023 Elantra N, and Kona N vehicles. The fuel pump may fail, which can result in a loss of drive power.
21V161000 (10/03/2021) — SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE Hyundai Motor America (Hyundai) is recalling certain 2019-2021 Genesis G70 vehicles. The Anti-Lock Brake System (ABS) module could malfunction and short circuit.
24V191000 (08/03/2024) — ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER Hyundai Motor America (Hyundai) is recalling certain 2018-2020 Genesis G80, 2017-2022 G90, and 2019-2022 G70 vehicles equipped with a 3.3-liter V6 turbocharged engine. The left turbocharger oil feed pipe may deteriorate and leak oil.
3 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2019–2022 Genesis G70 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.