2010–2011 Ford Taurus

Community-sourced DIY repair guides for the 2010–2011 Ford Taurus, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

6F50 harsh bump on takeoff — valve-body TSB 11-12-10 Owner-verified (3.5L Duratec V6)

Dealer TSB — valve-body work and a PCM reflash. Not a driveway job, but knowing the TSB number keeps the dealer honest.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: TSBSearch: Ford TSB 11-12-10 — 6F50/6F55 sluggish acceleration 0-5 mph followed by harsh bump; covers 2010-2011 Taurus built on/before 4/15/2011; separator-plate + check-ball valve-body fix · TrueDelta: multiple 2010/2011 Taurus owner reports — harsh bump after stops, TSB 11-12-10 separator-plate repair, TCM reflashes, TSB 11-08-21 · ExplorerForum: owner confirms TSB 11-12-10 '100% fixed' the coast-down-then-slam shift behavior on the shared 6F50

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2010–2011 Ford Taurus specifically. See NHTSA data for all Taurus years →

Factory service bulletins

We don't have factory bulletin data for the 2010–2011 Ford Taurus yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.