2017–2019 Ford F-750

Community-sourced DIY repair guides for the 2017–2019 Ford F-750, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Driveline vibration at 1,500-1,700 RPM — PCM reprogram (TSB 20-2012) Factory-documented (6.7L Power Stroke V8 diesel)

Dealer TSB repair — PCM reprogram. The owner-side value: a steady vibration in a narrow RPM band on a 2017-2019 6.7L F-750 is a known calibration issue, not automatically bad u-joints or a bent driveshaft — check this TSB before paying for driveline parts.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: Ford dealer bulletin index for TSB 20-2012 — driveline vibration 1,500-1,700 RPM (ford.oemdtc) · NHTSA bulletin PDF for TSB 20-2012 (MC-10170913-0001, static.nhtsa.gov)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2017–2019 Ford F-750 specifically. See NHTSA data for all F-750 years →

Factory service bulletins

We don't have factory bulletin data for the 2017–2019 Ford F-750 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.