2016–2018 Ford F-750

Community-sourced DIY repair guides for the 2016–2018 Ford F-750, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Inaccurate DEF level gauge with no DTCs — PCM reprogram (TSB 19-2006) Factory-documented (6.7L Power Stroke V8 diesel)

Dealer TSB repair — 0.5 hr PCM reprogram, warranty if applicable. The owner-side value: a lying DEF gauge with no codes on a 2016-2018 6.7L F-750 is a software issue, not a bad sender — do not pay for a DEF tank/sender replacement before checking the build date against this TSB.

Typical difficulty: Involved — based on 72 code guides for the scr repair area (an area-level estimate, not this exact job).

Typical time: “The fix is a PCM reprogram — 0.5 hour labor (operation 192006A).” — as written in the note. First-timers often take twice this.

Torque specs

Tips

Sources: Ford TSB 19-2006 — incorrect DEF gauge indication, 2016-2018 F-650/F-750 (static.oemdtc PDF) · NHTSA bulletin PDF for TSB 19-2006 (MC-10153919-9999, static.nhtsa.gov)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2016–2018 Ford F-750 specifically. See NHTSA data for all F-750 years →

Factory service bulletins

We don't have factory bulletin data for the 2016–2018 Ford F-750 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.