2017–2022 Ford F-350

Community-sourced DIY repair guides for the 2017–2022 Ford F-350, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Aluminum driveshaft fracture from loose underbody insulators — recall 22V087 (22S09) Factory-documented (6.2L Boss V8, 7.3L Godzilla V8)

Recall inspection is dealer-only and free. A pre-inspection crawl under the truck is reasonable: look for a loose or sagging underbody heat/noise insulator near the driveshaft.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: oemdtc.com: NHTSA 22V087 — 2017-2022 F-250/F-350 Super Duty with gasoline engines and aluminum driveshafts · AP (via North Platte Post): ~247,000 F-250/F-350 Super Duty trucks recalled — shaft can fracture · NHTSA quarterly report: 22V-087 / 22S09 — 247,445 population, 111,902 remedied by Q4 2022 · Work Truck Online: dealers inspect/repair the driveshaft and re-attach insulators free of charge

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2017–2022 Ford F-350 specifically. See NHTSA data for all F-350 years →

Factory service bulletins

We don't have factory bulletin data for the 2017–2022 Ford F-350 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.