2018–2020 Ford Expedition

Community-sourced DIY repair guides for the 2018–2020 Ford Expedition, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Cam phaser rattle on cold start (TSB 23-2143) Owner-verified (3.5L EcoBoost V6)

The VCT units sit behind the front timing cover, so this is a dealer or well-equipped-shop job, not a driveway repair. Diagnosis is the DIY part: a phone video of a cold start plus the TSB number is what gets the dealer to stop stalling.

Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: owner forum · owner forum · owner forum · owner forum

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 416 complaints for the 2018–2020 Ford Expedition. 2020 was the worst year (416 complaints). Most-reported areas: power train, unknown or other, engine.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Expedition years →

Recalls

18 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2018–2020 Ford Expedition yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.