2013–2021 Ford Escape

Community-sourced DIY repair guides for the 2013–2021 Ford Escape, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

PTU fluid service (AWD grind/growl prevention) Owner-verified (1.6L EcoBoost I4, 2.0L EcoBoost I4)

From below with all four wheels level (jack stands under all corners). The PTU is bolted to the side of the transaxle — remove the underbody cover (7mm screws) to reach it. 2020+ units have both drain and fill plugs; earlier units may need fluid extracted through the fill hole.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: guide · guide · owner forum

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 2,656 complaints for the 2013–2021 Ford Escape. 2020 was the worst year (1531 complaints). Most-reported areas: structure, power train, unknown or other.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Escape years →

Recalls

27 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2013–2021 Ford Escape yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.