Community-sourced DIY repair guides for the 2012–2016 Fiat 500, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Dealer-only campaign — no driveway procedure. Call any Fiat dealer with the VIN to check whether the recall is open and whether the parts are in stock before scheduling.
Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).
Torque specs
Clutch / pedal fasteners: verify — Recall work is dealer-performed; no owner torque specs needed.
Tips
What failed: 2012-2016 Fiat 500s with a manual transmission (turbo Abarth/500T excluded) can have a clutch release system that travels up to 10.63 mm when the clutch assembly is only designed for 9.40 mm. That over-travel fatigues the clutch cover diaphragm spring until it fractures — then you can't disengage the clutch, can't shift, and can lose motive power with no warning.
The campaign is FCA S34 / NHTSA 16V-302, covering about 39,217 US vehicles built June 21, 2010 through January 12, 2016. It is a free safety recall — do not pay a shop for a clutch job before checking this.
The dealer remedy: inspect for an existing clutch pedal travel limiter; cars without one get a new clutch pedal assembly (CBJDS341AA) plus a new clutch pedal start switch and brake lamp switch. The limiter physically prevents the over-travel that fatigues the spring.
Owner gotcha worth knowing: the recall only prevents future damage — it does not replace a diaphragm spring that is already fatigued from years of over-travel. High-mileage owners have flagged that the free fix doesn't restore a clutch that's already been stressed.
If your 500 is manual and the clutch pedal suddenly locks solid or drops to the floor with no resistance, check this recall's status before authorizing any paid clutch work — TrueDelta repair logs show a 'clutch plate recall' entry at 113k miles on a 2012.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 410 complaints for the 2012–2016 Fiat 500. 2012 was the worst year (396 complaints). Most-reported areas: power train, electrical system, engine.
24V474000 (25/06/2024) — TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS Chrysler (FCA US, LLC) is recalling certain 2014-2019 Fiat 500 vehicles. The tire pressure monitoring system (TPMS) warning light may not illuminate as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard…
16V302000 (16/05/2016) — POWER TRAIN:MANUAL TRANSMISSION Chrysler (FCA US LLC) is recalling certain model year 2012-2016 Fiat 500 vehicles manufactured June 21, 2010, through January 12, 2016, equipped with a manual transmission. The clutch diaphragm spring may fracture and fail, causing an inability to switch gears.
19V817000 (15/11/2019) — POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:FLOOR SHIFT Chrysler (FCA US LLC) is recalling certain 2012-2013 Fiat 500 vehicles equipped with 6-speed automatic transmissions. The shifter cable bushing may fail allowing the cable to detach from the transmission.
16V667000 (15/09/2016) — EQUIPMENT:OTHER:LABELS Chrysler (FCA US LLC) is recalling certain model year 2016 Fiat 500 vehicles manufactured June 11, 2015, to July 27, 2016. The tire placard on the affected vehicles lists a tire inflation pressure for the spare tire that exceeds the…
11V550000 (10/11/2011) — SERVICE BRAKES, HYDRAULIC:FLUID CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2012 DODGE JOURNEY AND FIAT 500 VEHICLES MANUFACTURED FROM OCTOBER 24, 2011, THROUGH OCTOBER 26, 2011. SOME VEHICLES WERE ASSEMBLED WITH CONTAMINATED BRAKE FLUID AND MAY EXPERIENCE A DEGRADATION OF THE SEALING COMPONENTS WITHIN…
19E044000 (03/07/2019) — POWER TRAIN:MANUAL TRANSMISSION:FLOOR SHIFT ASSEMBLY DLT, LLC. is recalling certain CravenSpeed Fiat Short Shifter shafts sold for use in 2011-2019 Fiat 500 vehicles. The Shifter Shaft may have been improperly manufactured with a through hole for the set screw rather than a blind hole, which…
6 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2012–2016 Fiat 500 yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.