2013–2015 Dodge Dart

Community-sourced DIY repair guides for the 2013–2015 Dodge Dart, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

DDCT shifts to neutral — TCM recall (R42) Factory-documented (1.4L MultiAir Turbo)

The fix is free at the dealer — no driveway work involved. The warning sign owners reported was a dash warning light followed by the transmission dropping into neutral on its own — engine stays running, steering, brakes, and airbags unaffected. If it happens, coast to a safe stop; the fix is a dealer visit, not a roadside repair.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: NHTSA Part 573 report for R42 / 15V-542 (Chrysler filing, PDF) · Automotive Fleet: R42 recall coverage · Manufacturing.net: AP coverage of the R42 recall

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2013–2015 Dodge Dart specifically. See NHTSA data for all Dart years →

Factory service bulletins

We don't have factory bulletin data for the 2013–2015 Dodge Dart yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.