2008–2010 Chrysler Town & Country

Community-sourced DIY repair guides for the 2008–2010 Chrysler Town & Country, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

EGR valve — P0404/P0406/P1404 codes Owner-verified (3.3L V6, 3.8L V6)

From above on the 3.3L/3.8L: the EGR valve sits behind the alternator on the intake side. Several owners removed it with just a 1/4-inch drive and a flexible 10mm socket WITHOUT pulling the alternator — soak the bolts with penetrating oil a day ahead.

Typical difficulty: Moderate — based on 85 code guides for the engine repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: DIY walkthrough (owner comments) · DIY walkthrough · certified tech · owner forum

P0404 on this Chrysler Town & Country — full diagnosis guide →

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this Town & Country

P0404
2008–2010 Chrysler Town & Country
EGR valve — P0404/P0406/P1404 codes
P0406
2008–2010 Chrysler Town & Country
EGR valve — P0404/P0406/P1404 codes

What owners report

No NHTSA complaint data in our records for the 2008–2010 Chrysler Town & Country specifically. See NHTSA data for all Town & Country years →

Factory service bulletins

We don't have factory bulletin data for the 2008–2010 Chrysler Town & Country yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.