2014–2017 Chrysler 300

Community-sourced DIY repair guides for the 2014–2017 Chrysler 300, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

AWD front driveshaft bolts loosen — T03 free replacement Factory-documented (3.6L Pentastar V6)

Dealer-only recall work — no DIY shortcut. Applies to AWD cars only; check by VIN whether T03 was already performed.

Typical difficulty: Moderate — based on 306 code guides for the transmission repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: T03 recall summary (NHTSA 17V097) · T03 recall record — 2017 300 · T03 recall report (69,298 vehicles)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 76 complaints for the 2014–2017 Chrysler 300. 2016 was the worst year (76 complaints). Most-reported areas: air bags, electrical system, power train.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all 300 years →

Recalls

3 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2014–2017 Chrysler 300 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.