2009–2014 Chevrolet Traverse

Community-sourced DIY repair guides for the 2009–2014 Chevrolet Traverse, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Seat-belt pretensioner and airbag campaigns Owner-verified (3.6L LY7/LLT V6)

Dealer-only campaigns — inspect the belt yourself using the instructions in the customer letter, then let the dealer do the replacement. All three campaigns below are VIN-checked.

Torque specs

Tips

Sources: NHTSA recall bulletin (GM 14187B) · NHTSA special coverage (N192219480) · press (recall coverage)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 354 complaints for the 2009–2014 Chevrolet Traverse. 2012 was the worst year (354 complaints). Most-reported areas: engine, electronic stability control (esc), steering.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Traverse years →

Recalls

5 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2009–2014 Chevrolet Traverse yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.