2021–2022 Chevrolet Blazer

Community-sourced DIY repair guides for the 2021–2022 Chevrolet Blazer, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Fuel pump power control module recall (stall / no-start) Factory-documented (2.0T turbo (LSY), 2.5L (LCV), 3.6L V6 (LGX))

Dealer-only recall repair. If your 2021–2022 Blazer stalls or cranks without starting, check whether your VIN is covered before paying for diagnosis — coverage expanded over time, so re-check even if you were told no earlier.

Typical difficulty: Moderate — based on 483 code guides for the fuel repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: GM Authority — GM recall N252516900 (fuel pump power control module) · Motoring Chronicle — recall expansion to nine GM model lines · AutoSafety — 2021 Blazer owner complaints (module failure, stall)

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2021–2022 Chevrolet Blazer specifically. See NHTSA data for all Blazer years →

Factory service bulletins

We don't have factory bulletin data for the 2021–2022 Chevrolet Blazer yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.