2011–2013 Buick Regal

Community-sourced DIY repair guides for the 2011–2013 Buick Regal, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

HID headlight moisture kills the ballast Owner-verified (2.0L Turbo LHU/LTG I4, 2.4L Ecotec I4)

The headlight assemblies sit behind the front bumper cover — pulling one means taking the bumper cover off, which owners say is less daunting than it looks. The ballast and the daytime-running circuit board sit at the bottom of the housing, which is exactly where collected water does its damage.

Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).

Torque specs

Tips

Sources: owner forum · owner forum · owner forum · owner forum · owner repair log · video walkthrough

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 92 complaints for the 2011–2013 Buick Regal. 2012 was the worst year (92 complaints). Most-reported areas: exterior lighting, engine, electrical system.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Regal years →

Recalls

7 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2011–2013 Buick Regal yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.