2013–2019 Buick Encore

Community-sourced DIY repair guides for the 2013–2019 Buick Encore, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Rear hatch won't open / latch sticks Owner-verified (1.4L Turbo I4 (LUV))

The latch actuator sits behind the liftgate inner trim panel: two 10 mm bolts plus a release cable and side pin. Reachable through the back seat with the hatch down — awkward but a genuine driveway job.

Torque specs

Tips

Sources: DIY video · owner Q&A · parts fitment · owner forum

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 79 complaints for the 2013–2019 Buick Encore. 2016 was the worst year (79 complaints). Most-reported areas: engine, fuel/propulsion system, power train.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all Encore years →

Recalls

2 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2013–2019 Buick Encore yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.