2013–2013 Buick Encore

Community-sourced DIY repair guides for the 2013–2013 Buick Encore, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Key removable when not in Park / rollaway risk (recall) Factory-documented (1.4L Turbo I4 (LUV))

The fix is entirely at the dealer: they inspect the key cylinder lock housing and replace it if the vehicle was serviced with the defective replacement park-lock lever — nothing to check under the dash yourself beyond noticing the symptom.

Typical difficulty: Moderate — based on 1374 code guides for the electrical repair area (an area-level estimate, not this exact job).

Tips

Sources: NHTSA recall data · recall listing · press

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

No NHTSA complaint data in our records for the 2013–2013 Buick Encore specifically. See NHTSA data for all Encore years →

Factory service bulletins

We don't have factory bulletin data for the 2013–2013 Buick Encore yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.