2019–2019 Buick Enclave

Community-sourced DIY repair guides for the 2019–2019 Buick Enclave, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Evap purge valve — rough idle, stall, P0496 Owner-verified (3.6L V6 LFY)

The purge valve sits on top of the engine under the plastic engine cover — remove the cover and the throttle-body intake hose to reach it. Two hose connections and one electrical connector; a 10-15 minute swap.

Typical difficulty: Moderate — based on 483 code guides for the fuel repair area (an area-level estimate, not this exact job).

Typical time: “Two hose connections and one electrical connector; a 10-15 minute swap.” — as written in the note. First-timers often take twice this.

Torque specs

Tips

Sources: service bulletin report · owner forum / guide · owner forum / guide · owner forum

P0496 on this Buick Enclave — full diagnosis guide →

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

Codes on this Enclave

P0496
2019–2019 Buick Enclave
Evap purge valve — rough idle, stall, P0496

What owners report

No NHTSA complaint data in our records for the 2019–2019 Buick Enclave specifically. See NHTSA data for all Enclave years →

Factory service bulletins

We don't have factory bulletin data for the 2019–2019 Buick Enclave yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.