2008–2016 Audi A5

Community-sourced DIY repair guides for the 2008–2016 Audi A5, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.

Owner-verified repair guides

Door lock actuator failure (door won't lock/unlock) Owner-verified (2.0L TFSI (EA888), 3.2L FSI V6, 3.0L TFSI supercharged V6 (EA837), 4.2L FSI V8)

Door panel and inner carrier come off; the actuator is inside the door frame held by two triple-square bolts, with three cables to transfer to the new unit. No coding or programming needed after replacement.

Torque specs

Tips

Sources: guide · guide · owner forum DIY · owner forum

No owner reports yet — fixed this yourself? tell us how

Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.

How notes are verified: Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.

What owners report

NHTSA recorded 34 complaints for the 2008–2016 Audi A5. 2012 was the worst year (22 complaints). Most-reported areas: air bags, engine, electrical system.

Counts are NHTSA complaints filed for these model years, via the NHTSA API. See data for all A5 years →

Recalls

4 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.

Factory service bulletins

We don't have factory bulletin data for the 2008–2016 Audi A5 yet.

Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.

Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.