Community-sourced DIY repair guides for the 2024–2025 Acura ZDX, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Owner-verified repair guides
Rearview camera recall (moisture in camera housing) Factory-documented(all)
Dealer visit: the rearview camera itself gets replaced with an improved part, free. This one cannot be fixed with a software update.
Torque specs
Rearview camera replacement: verify — Dealer-installed camera; confirm mounting torque against factory service info.
Tips
The rearview camera housing was improperly bonded, so adhesive can separate over time and let moisture into the camera assembly. Corrosion inside the camera makes the image blurry or distorted, or kills it entirely (black screen in reverse).
The recall covers 14,688 Acura ZDX (2024-2025) and 44,199 Honda Prologue vehicles, about 59,887 total. Honda estimates only around 5 percent actually have the defect. Vehicles built from June 9, 2025 onward already have the improved camera and are not included.
Because the fault is in the camera hardware, it cannot be fixed over the air. Dealers replace the rearview camera with an upgraded component, free.
Honda's numbers for this recall are DO5 and DO6 (NHTSA 26V306000). Owner notification letters were expected around July 6, 2026.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 56 complaints for the 2024–2025 Acura ZDX. 2024 was the worst year (56 complaints). Most-reported areas: forward collision avoidance, service brakes, unknown or other.
26V112000 (26/02/2026) — BACK OVER PREVENTION:SOFTWARE Honda (American Honda Motor Co.) is recalling certain 2024 Acura ZDX and Prologue vehicles. Due to a software error, the instrument panel display may fail. Additionally, a software error may cause the rearview camera to display a blank screen when…
25V018000 (16/01/2025) — ELECTRICAL SYSTEM:PROPULSION SYSTEM: CABLES Honda (American Honda Motor Co.) is recalling certain 2024 Acura ZDX vehicles. The front passenger stabilizer bar bracket bolts may become loose and detach from the frame, which can damage the high voltage cables or EV battery coolant lines.
24V614000 (15/08/2024) — SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE Acura (American Honda Motor Co.) is recalling certain 2024 Acura ZDX All-Wheel Drive vehicles. The anti-lock brake system (ABS) may activate unexpectedly and release brake pressure in the vehicle's service brake system.
26V306000 (14/05/2026) — BACK OVER PREVENTION: SENSING SYSTEM: CAMERA American Honda Motor Company (Honda) is recalling certain 2024-2025 Honda Prologue and 2024 Acura ZDX vehicles. The rearview camera screen may display a distorted or blank image.
25V234000 (10/04/2025) — SUSPENSION:FRONT:STABILIZER BAR Honda (American Honda Motor Co.) is recalling certain 2024 Acura ZDX vehicles. The passenger-side front stabilizer bar bracket bolts may have been improperly tightened, which can allow the bolts to loosen and separate from the vehicle frame. A detached stabilizer…
5 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2024–2025 Acura ZDX yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.