Community-sourced DIY repair guides for the 2007–2016 Acura MDX, plus NHTSA complaints and recalls sliced to these model years. Every guide below comes from real owner-community procedures with sources.
Owner-verified repair guides
Front suspension clunk/pop while turning (bushings, end links) Factory-documented(3.7L V6, 3.5L V6)
Sway-bar links and bushings are a driveway job. Control arms are intermediate (alignment mandatory afterward).
Typical difficulty: Moderate — based on 27 code guides for the suspension repair area (an area-level estimate, not this exact job).
Tips
TSB 16-042 documents a pop from the front suspension while turning on 2014-2016 MDXs - if a dealer shrugs, cite the bulletin number.
On 2007-2013 cars the usual wear items are torn lower-control-arm (compliance) bushings and sway-bar end links/bushings - owners report clunks over bumps and thuds, with torn LCA bushings the classic find around 100k miles.
Quick driveway diagnosis: front end on jack stands, grab each tire at 3 and 9 o'clock and rock it - clunks or slop point at the worn joint. Cracked-through rubber on the compliance bushing means replacement time.
Sway-bar links and bushings are cheap and DIY-friendly; control arms are a bigger job and the car needs an alignment afterward.
Do not authorize a $4,000-plus 'full front suspension' quote without seeing which bushings are actually torn - owners report shops upselling normal 'some wear' into full replacements.
Difficulty lines above are area-level estimates from code guides for that repair area, not the exact job; times are quoted verbatim from the notes themselves — first-timers often take twice this.
How notes are verified:Robbie-tested — Robbie did this repair on his own car and confirmed the fix himself. Owner-verified — community repair procedure with 2+ cited sources. Factory-documented — drawn from a factory TSB, recall, or campaign document; a factory procedure, not an owner-tested fix. Community-reported — single-source or otherwise unverified; treat as a lead, not a verdict.
What owners report
NHTSA recorded 499 complaints for the 2007–2016 Acura MDX. 2016 was the worst year (374 complaints). Most-reported areas: engine, power train, electrical system.
19V060000 (29/01/2019) — FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP Honda (American Honda Motor Co.) is recalling certain 2016-2018 Acura MDX, 2015-2019 Acura TLX and 2015-2017 Honda Accord vehicles, equipped with a 3.5L V6 engine. Particulates in fuel may adhere to the internal components of the fuel pump, reducing its…
19V256000 (28/03/2019) — EXTERIOR LIGHTING:TAIL LIGHTS Honda (American Honda Motor Co.) is recalling certain 2014-2019 Acura MDX and 2017-2019 Acura MDX Sport Hybrid vehicles. Moisture may enter the tailgate lid lights, possibly causing a loss of the tailgate lid lights and the taillights.
25V259000 (17/04/2025) — EXTERIOR LIGHTING Honda (American Honda Motor Co.) is recalling certain 2014-2020 Acura MDX vehicles. Moisture may enter the tailgate lid light assembly and wiring harness, which can cause the interior and exterior lights to fail, including the lid lights, position lights, license…
12V063000 (17/02/2012) — FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY HONDA IS RECALLING CERTAIN MODEL YEAR 2012 PILOT AND ACURA MDX VEHICLES. THE VENT SHUT FLOAT (VSF) VALVE CASE IN THE FUEL TANK ASSEMBLY DOES NOT MEET THE DESIGN SPECIFICATIONS.
23V751000 (13/11/2023) — ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL Honda (American Honda Motor Co.) is recalling certain 2015-2020 Acura TLX, 2016-2020 Acura MDX, 2016 and 2018-2019 Pilot, 2017 and 2019 Ridgeline, and 2018-2019 Odyssey vehicles. Due to a manufacturing error, the connecting rod bearing in the engine may wear…
9 recall campaigns touch these years. Check your VIN at nhtsa.gov/recalls.
Factory service bulletins
We don't have factory bulletin data for the 2007–2016 Acura MDX yet.
Counts are deduplicated NHTSA manufacturer communications for these model years, via the NHTSA safety-issues API. Look up bulletins for your exact VIN at nhtsa.gov/recalls under Manufacturer Communications.
Torque specs marked “verify” were not published with a citable factory source — confirm them against the factory service manual for your exact engine before tightening. A trouble code does not prove a part needs replacement.